HOME
COUNCIL
Community
DEVELOPMENT
ENVIRONMENT
CONTACT US
ALERTS

Energy Efficiency and Sustainability for Housing

Wellington Shire Council is committed to recognising and advocating for best practice residential development which considers energy efficient and sustainable housing design.
Share

Council encourages everyone to incorporate Environmentally Sustainable Design (ESD) and energy efficiency principles into the design of their new dwellings or additions.

Incorporating these principles at the pre-development stage has a range of different benefits including a reduction in operating costs, a potentially more desirable dwelling which may fetch a higher sale price, and a more comfortable living environment for occupants.

Including Environmentally Sustainable Design (ESD) and energy efficiency measures in your initial design is a lot easier than trying to retrofit these measures later on.

Dealing with the ‘big picture’ issues during the initial stages of design assists with optimising ESD and energy efficiency outcomes at the development stage. Some of these ‘big picture’ issues include the orientation of the dwelling or renovation, the internal layout, the positioning of windows to capture the northern sun, and incorporating water reuse into housing design.

What is Environmentally Sustainable Design (ESD)?

The aim of Environmentally Sustainable Design principles is to reduce negative impacts on the environment and increase the health and comfort of a building for its occupants. The principles of ESD include:

  • Optimising the sites potential
  • Minimising non-renewable energy consumption
  • Reducing the use of potable water
  • Enhancing indoor environmental quality
  • Using appliances which are water and energy efficient
  • Using environmentally friendly products
  • Optimising operational and maintenance practices

Benefits of incorporating ESD in your planning application

Considering ESD at the design and concept stage of your proposal will assist with achieving the greatest benefits. These benefits include:

  • A reduction in running costs
  • A reduction in energy bills
  • A reduction in water consumption
  • Improved liveability and amenity for occupants
  • Building regulation compliance
  • Reduced operational costs
  • Improved productivity and comfort for occupants
  • Reduced costs over the lifetime of the building
  • A reduction in the amount of waste both during construction and over the life of the building
  • Potential higher resale value

What is Energy Efficiency?

  • Being Energy Efficient means using less energy to achieve the same outcomes
  • Energy Efficiency is an effective, immediate means of managing energy needs more sustainably

General Tips for Building an Environmentally Sustainable and Energy Efficient Dwelling, or Dwelling Addition

In order to improve your dwellings energy efficiency and reduce operating costs, consider the following when orientating and designing your dwelling (or addition):

Orientation

  • Orientate those rooms which you spend more time in, such as the living room, towards the north, so that they can be exposed to more sun and light.
  • Position utility areas, such as bathrooms and laundries (where typically less time is spent) to the south or west side of the dwelling.

Living areas

  • Open plan living is very popular, but larger spaces require greater levels of heating and cooling.Consider having the ability to close off living areas as required.

Eaves

  • Installing eaves over north facing windows will assist with reducing sun exposure in the summer to keep your dwelling cooler and increasing sun exposure in winter to keep your dwelling warmer.

Verandas and pergolas

  • Install verandas or pergolas to assist with shading of windows and outdoor spaces.

Zoning

  • Grouping rooms with similar uses together is known as ‘zoning’ – grouping living rooms,bedrooms and wet areas can enable more efficient heating and cooling.

Rainwater Tanks

  • Install rainwater tanks connected to toilets, laundry and the garden to enable reuse of water.

Glass

  • Too many windows or glass doors can make your dwelling hot in summer and cold in winter. Consider limiting the amount of glass on the eastern and western sides of your dwelling.

Cross Ventilation and Natural Cooling

  • It is important to position windows so that they allow for cross ventilation and air flow throughout the dwelling to enable a cooler space during summer.

Internal temperature

  • A metal roof can help to reflect sunlight, and assist with reducing internal temperatures.
  • If used in the right areas of the dwelling, the thermal mass of brick, stone and concrete can help to absorb and store heat during winter.

Insulation

  • Using insulation in the walls, ceilings and floors can assist with reducing heat loss and maintaining a comfortable living environment.
  • Using pelmets when installing curtains or blinds can help to improve window insulation.

Lighting

  • Installing LED lighting (while slightly more expensive than other lighting) can save as much energy as fluorescent lighting, and can last up to three times longer, meaning you won’t need to change globes as often.

Colour

  • Using lighter colours on your external roof and walls can help with internal comfort. Lighter colours help to reflect heat and enable your home to be cooler in the summer.

Solar Panels

  • Install solar panels to assist with reducing your electricity bills and your carbon footprint. Solar panels use the heat from the sun to produce energy to power your home.
  • In Australia, solar panels work best when they are facing north, as this is the optimum direction for catching sunlight.North facing solar panels generate more electricity, which in turn assists with lowering energy bills.

Building Regulations, Environmentally Sustainable Design and Energy Efficiency

Building regulations mandate a minimum standard only when it comes to ESD and energy efficiency. All new dwellings (and renovations, alterations and additions of a certain size) are required to achieve a six-star energy rating. This includes incorporating either a solar hot water system or a rainwater tank connected to all sanitary flushing systems.

No items found.
Airly-Clydebank Hall
556 Clydebank Road, Airly
Binginwarri Hall and Recreation Reserve
675 Albert River-Welshpool Road, Binginwarri
Boisdale Public Hall
42-44 Main Street, Boisdale
Briagolong Mechanics Institute Hall
2 Avon Street, Briagolong
Bundalaguah/Myrtlebank Hall
794 Maffra-Sale Road, Bundalaguah
Carrajung South Hall
89 Old Carrajung Road, Carrajung Lower
Coongulla Community Centre
Gillum Road, Coongulla
Cowwarr Public Hall
31-33 Main Street, Cowwarr
Dargo Public Hall and Recreation Reserve
177 Lind Avenue, Dargo
Denison Public Hall
1293 Denison Road, Denison
Devon North Public Hall
599 Tarra Valley Road, Devon North
Giffard West Public Hall
3877 South Gippsland Highway, Giffard West
Glenmaggie Mechanics Institute (Public Hall)
21 Glenfalloch Road, Glenmaggie
Golden Paradise Beach Community Centre
Surf Edge Drive, Golden Beach
Gormandale Mechanics Institute
Main Road, Gormandale
Heyfield Community Resource Centre
3-5 George Street, Heyfield
Heyfield Memorial Hall
38-40 MacFarlane Street, Heyfield
Kilmany Public Hall and Recreation Reserve
21 Freshwaters Road, Kilmany
Licola Public Hall
8 Jamieson-Licola Road, Licola
Loch Sport Public Hall
222-236 National Park Road, Loch Sport
Longford Hall and Recreation Reserve
Corner South Gippsland and Longford-Loch Sport Road, Longford
Macks Creek Public Hall
Bulga Park Road, Macks Creek
Maffra Memorial Hall
11-15 Foster Street, Maffra
Manns Beach Hall
David Street, Manns Beach
Meerlieu Public Hall and Recreation Reserve
1455 Lindenow-Meerlieu Road, Meerlieu
Munro Public Hall
191 Munro-Stockdale Road, Munro
Nambrok Public Hall and Recreation Reserve
173 Nambrok Hall Road, Nambrok
Newry Hall
139-141 Main Road, Newry
Port Albert Mechanics Institute
20 Victoria Street, Port Albert
Rosedale Public Hall
37-39 Prince Street, Rosedale
Sale Memorial Hall
Macalister Street, Sale
Seaton Hall and Recreation Reserve
1043 Main Street, Seaton
St Johns Ambulance Hall
Stead Street Reserve, Sale
Staceys Bridge Hall
248 Albert River Road, Staceys Bridge
Stradbroke Recreation Reserve and Hall
4971 South Gippsland Highway, Stradbroke
Stratford Mechanics Hall
17 Hobson Street, Stratford
Tinamba Public Hall
Rosedale-Maffra Road, Tinamba
Valencia Soldiers Memorial Hall
84-86 Briagolong Road, Valencia Creek
Willung Public Hall
195 Willung Hall Road, Willung
Won Wron Hall
4737 Hyland Highway, Won Wron
Wonyip Public Hall
Old Wonyip Road, Wonyip
Woodside Public Hall
Corner Prince Street and Austins Road, Woodside
Yarram Mechanics Hall
2-4 Church Street, Yarram
Alberton West Recreation Reserve
331 - 333 Lanes Road, Alberton West
Bellbird Corner Riverside Reserve
Sandy Creek Road, Maffra
Binginwarri Hall and Recreation Reserve
675 Albert River-Welshpool Road, Binginwarri
Boisdale Recreation Reserve
Main Street, Boisdale
Briagolong Quarry Reserve
Freestone Creek Road, Briagolong
Briagolong Recreation Reserve
Briagolong Road, Briagolong
Cameron Sporting Complex
Morison Street, Maffra
Carrajung Memorial Park
McDermott Street, Carrajung
Charles Street Recreation Reserve
Charlies Street, Loch Sport
Cowwarr Recreation Reserve
2-24 Pine Grove Avenue, Cowwarr
Dargo Public Hall and Recreation Reserve
177 Lind Avenue, Dargo
Denison Recreation Reserve
1422 Sale-Heyfield Road, Denison
Devon North Recreation Reserve
683 Tarra Valley Road, Devon North
Golden Beach (Veronica Maybury) Recreation Reserve
Surf Edge Drive, Golden Beach
Gordon Street Recreation Reserve
Gordon Street, Heyfield
Gormandale Recreation Reserve
14-16 Main Road, Gormandale
Kilmany Public Hall and Recreation Reserve
21 Freshwaters Road, Kilmany
Loch Sport Foreshore Reserve
Lake Street, Loch Sport
Longford Hall and Recreation Reserve
Corner South Gippsland and Longford-Loch Sport Road, Longford
Maffra Recreation Reserve
Corner Edward Street and McLean Street, Maffra
Meerlieu Public Hall and Recreation Reserve
1455 Lindenow-Meerlieu Road, Meerlieu
Nambrok Public Hall and Recreation Reserve
173 Nambrok Hall Road, Nambrok
Newry Community Tennis Courts and Parklands
30 McGole Street, Newry
Newry Recreation Reserve
838 Three Chain Road, Newry
Pine Lodge Reserve
Llowalong Road, Stratford
Port Albert Racecourse and Recreation Reserve
Port Albert - Tarraville Road, Port Albert
Rosedale Racecourse Reserve
10 Evergreen Road, Rosedale
Rosedale Recreation Reserve
Moore Street, Rosedale
Seaspray Foreshore Reserve
Corner Futcher Street and Shoreline Drive, Seaspray
Seaton Hall and Recreation Reserve
1043 Main Street, Seaton
Stradbroke Recreation Reserve and Hall
4971 South Gippsland Highway, Stradbroke
Stratford Recreation Reserve
Wellsford Street, Stratford
Tarraville Recreation Reserve
9 Bridge Street, Tarraville
Won Wron Recreation Reserve
4706 Hyland Hwy, Won Wron
Woodside Recreation Reserve
4-18 High Street, Woodside
Yarram Recreation Reserve
50 Railway Avenue, Yarram
No items found.
No items found.

Environmental Sustainability - Design Assessment Tools

There are a range of Design Assessment Tools to measure environmentally sustainable design and energy efficiency. Some of the most common Tools include:

BESS (Built Environment Sustainability Scorecard)

BESS is an online sustainable design assessment tool. It is:

  • A free tool for planning applicants to use
  • Assesses all types of buildings of all different sizes,including mixed use developments
  • Is an easy and straight forward program to use
  • Can be used as a bench marking tool against other developments
  • Assists with reducing the running costs of new buildings
  • Provides a range of liveability and useability benefits for building owners and users
  • The information required to complete a BESS Assessment depends on the nature of the proposal; simpler applications require more basic information, whereas larger, more complex applications require more detailed information.

For more information visit the BESS website.

STORM (Stormwater Treatment Objective – Relative Measure)

STORM is a free tool which assesses storm water management qualities. The purpose of STORM is to assess whether best practice water quality objectives can be achieved as part of a development. STORM is managed by Melbourne Water.

For more information visit the STORM website.

NatHERS (Nationwide House Energy Rating Scheme)

NatHERS is a star rating system (out of 10) which determines the energy efficiency (heating and cooling) of a dwelling, based on the design of the dwelling. It assists with meeting the requirements of the National Construction Code. The purpose of NatHERS is to assist with designing homes which are more comfortable for inhabitants and to reduce the operating costs of the dwelling.

For more information visit the NatHERS website or view a short video on YouTube explaining Energy Efficiency at Home.

Orientation and Siting

The orientation of your dwelling and its individual rooms can play a significant part in the ongoing operating costs of your home and the comfort of your family. Depending on the season, the position of the sun varies. It is important that you position your dwelling to take advantage of these sun variations. Good orientation and siting can reduce your dwellings use of energy for heating and cooling purposes, which in turn can reduce energy bills and increase comfort levels within the home.

Consider the following when orientating and siting your dwelling:

  • Locate living areas and windows to the north of the dwelling to take advantage of the winter sun and reduce exposure to the summer sun.
  • Position utility areas, such as bathrooms and laundries (where typically less time is spent) to the south or west side of the dwelling.
  • Minimise the number of windows on the south, east and west sides of the dwelling.
  • Avoid locating bedrooms on the western side of the dwelling, as this will lead to an uncomfortable night’s sleep. Instead locate bedrooms to the south of the dwelling to enable better sleeping conditions.
  • Site your dwelling with the southern and western walls as close as possible to the boundaries of the land to allow the northern and eastern areas to be used for outdoor living and gardens.
  • Position your garage or carport on the western side of the dwelling to reduce the exposure of sun to the western side of the dwelling. Avoid placing any obstructions on the northern side.
  • West facing walls receive the strongest sun during the hottest part of the day in summer time.
  • Incorporate a large expanse of north facing roof to allow for optimising the positioning of solar panels and hot water panels.
  • Ensure that north facing walls and windows are well setback from other large buildings or trees to minimise the extent of overshadowing.
  • Strategically locate plantings to ensure that larger trees and shrubs do not result in overshadowing.

Building Materials

The materials you use to construct your new dwelling or addition can have a significant impact on the carbon footprint of the building, and also how energy efficient the building will be. It is important to consider your building materials up front because it can be difficult and more expensive to retrofit an existing building. In addition, while the initial costs may be higher in order to incorporate these materials, they can pay off over the lifetime of the building.

Insulation

  • All building materials allow heat to pass through them. Insulation helps to reduce the transfer of this heat depending on the seasons.
  • Using insulation in your building can assist with minimising heat loss in winter and preventing heat gain in summer.
  • In winter, insulation acts like thermos and keeps the heat in, and in summer, it acts like an esky to keep the heat out.
  • Insulation should be incorporated throughout the building, including in the ceiling, roof, walls and floor.
  • Insulation is most effective in conjunction with good building orientation and siting on the property.
  • Common types of insulation include polyester batts, polystyrene sheets, glass wool batts and sheep’s wool batts.
  • Insulation comes in two main categories – bulk and reflective. To determine the effectiveness of each different type, we need to measure their resistant to heat flow, which is known as their ‘R-value’. A higher ‘R-value’ will result in a higher level of insulation.
  • Renovations are often an ideal time to install new insulation in your floors and walls.

Thermal Mass

  • Thermal mass is the capacity of building materials to store and absorb heat, and then release it at a later time.
  • During the summer, the heat is absorbed and released at night to cooling breezes or the clear night sky, ensuring the building does not get too hot, while in winter, the heat from the sun is stored to be released internally at night, to assist with keeping the building warm.
  • Different materials have different thermal mass – brick, concrete or straw bale typically have a higher thermal mass, while weatherboard and corrugated iron have a lower thermal mass.
  • Like insulation, thermal mass works best with good building design; glazing facing appropriate directions, appropriate levels of shading, insulation and thermal mass.
  • When used appropriately, thermal mass can make a big difference to the interior comfort of a building and can minimise the need for mechanical heating and cooling.

Construction Materials

  • It is important to consider the materials you use when constructing your building, as different materials can have a different impact on the environment.
  • Each material has a different amount of ‘embodied energy’ used to produce it (from raw resource extraction, its manufacture, and transporting and delivery of the material).
  • It is important to use a range of different materials in the construction of your building. You should look at incorporating certain materials to enable a high thermal mass, but also using other materials to which enable low energy consumption.
  • If you are demolishing an existing dwelling, it is beneficial to use existing building materials such as bricks, timber and windows.
  • The majority of new buildings use new materials, which is not always environmentally friendly.Incorporating materials that traditionally have a longer lifespan is better for the environment.
  • Materials which are produced locally can assist with reducing transport omissions.
  • Different building materials have different benefits, and it is important research which construction material will have the best environmental benefits for your building.
  • Some common building materials include brick,concrete, corrugated steel, weatherboard, straw bale, mud brick, rammed earth, autoclaved aerated concrete (AAC) and earth brick.

Windows and Glazing

Windows play an important part in the makeup of a dwelling. Windows let in air to cool and ventilate a dwelling, as well as natural light to provide a comfortable living environment. They also enable views of the outdoors and connect the interior and exterior of dwellings. It is important to appropriately design and locate your windows to take advantage of these benefits, and also in order to reduce heat gain in summer and heat loss in winter.

  • Windows which are appropriately designed and located can assist with making your home more comfortable, help to reduce your energy costs, and create brighter and comfortable living areas within the home.
  • Windows on the northern elevation should be maximised, and shaded with eaves or other shading devices.
  • On the southern elevation, the number of windows should be minimised, however there should be enough openings to allow for cross ventilation throughout the dwelling.
  • Windows on the east of the dwelling should be avoided, however if required, should be as small as necessary. These windows need to be provided with external shading.
  • Like eastern windows, western windows should also be avoided, or minimised. The western side of any dwelling will be exposed to the strongest sun at the hottest time of the day.
  • Locate windows to allow for cross-ventilation throughout your dwelling. In summer time, this will enable the evening summer breezes to flow through and help cool your dwelling.
  • When choosing your windows,it is important to consider the type of glass, the window frames, and any window coverings, as this assists with improving the energy efficiency of your dwelling.
  • Installing double glazed windows can help to reduce the amount of heat gain in a dwelling during the summertime and reduce the amount of heat which is lost in the winter time.

Shading

Shading of your dwelling and outdoors spaces can assist with reducing summer temperatures,improving the comfort of your building, and saving energy. The shading of glass is critical to assist with minimising heat gain, as one of the greatest sources of heat gain in a dwelling is unprotected glass. Once heat passes through the glass, it becomes absorbed by building materials and furniture, effectively becoming trapped and creating a greenhouse like effect.

  • Effective shading can include eaves, shutters, window awnings, pergolas and plantings.
  • Eaves which are correctly designed can be some of the most simple and cost effective shading methods on the northern elevation of your dwelling.
  • When choosing the appropriate shading devices, ensure that they are effective in reducing the summer heat, but that they do not block out the winter sun. Installing adjustable shading devices will allow for seasonal variation.
  • External shading of windows is more effective than internal shading, though both combined will give the best results.
  • External shading devices help to reduce the transfer of heat through the fabric of the building. Internal shading devices can assist with reflecting a small amount of heat which has already penetrated the buildings fabric. However once the heat is already in the building, it is harder to enable a more comfortable building temperature.
  • The most efficient types of shading differ depending on the orientation of your windows.

North facing windows

  • Fixed horizontal shading devices such as eaves and pergolas.
  • Adjustable external shading such as awnings, blinds and roller shutters.

East and west facing windows

  • East facing windows can be a major source of heat gain in the morning during the summer time, while in the afternoon, it is the west facing windows.
  • Best shaded by adjustable external shading devices such as awnings, blinds, lourves, shutters or angled metal slats. Having adjustable devices allows flexibility to make adjustments as required by weather conditions and comfort levels.

South facing windows:

  • Don’t require shading in summer to the same extent, as they receive very minimal sunlighto South facing windows are best used for ventilation purposes.
  • In winter time, south facing windows can lose heat, so windows should be double glazed, and heavy curtains and pelmets should be included in design.

Solar Panels

The purpose of solar panel systems is to harness sunlight in order to generate electricity. The rising cost of electricity has left many home owners worried about future electricity costs, and many are turning to solar panels in order to reduce energy bills. Others are also looking to install solar panels to produce greener energy and be environmentally friendly.

  • To determine what size solar panel system you need, you need to work out how much electricity you use, and at what times of the day you use it. To do this, check previous electricity bills.
  • Different days, times and seasons will require different levels of usage ie. usage is typically higher on weekends when more people are at home, summer time means extended air conditioning use, while in winter, the heater is often running.
  • A typical Australian home uses 20kWh of energy a day, which equates to a 5kWh system.
  • The number of panels installed is actually irrelevant; it’s about the overall capacity of the system that you install as to the success of the system.
  • If you choose panels with a higher power rating (and therefore a higher output), you will needless panels. However, if you have more roof space available to install the panels, sometimes it can be more economical to purchase cheaper panels that have a lower energy efficiency individually, and install more of them.
  • In Australia, solar panels work best when they are facing north, as this is the optimum direction for catching sunlight. North facing solar panels generate more electricity, which in turn assists with lowering energy bills.
  • It is important to ensure that there are no trees, structures or power lines which could result in the shading of the solar panels.
  • There are two main components to the solar panel system; the panels themselves, and the inverter (the part that enables the electricity generated by the solar panels to be converted to use in household circuits to power your television, fridge, air conditioner etc). Some people also chose to install a battery to store any surplus energy for future use as required.
  • In Australia, we have grid-connected and off-grid solar systems. Grid-connected are the most common and are those systems which are also connected to the main electricity grid. During the day, the power generated from the solar panels is used, and at night, or on days when there is less sunlight, the main electricity grid can be used (if no battery is installed).
  • The off-grid system is a complete stand alone system, and all the power for the dwelling comes from the solar system (though sometimes from other sorts of power generation, like wind, and in some instances, generators can also be used).

Water Sensitive Urban Design (WSUD)

Water Sensitive Urban Design (WSUD) integrates water cycle management into the built environment (ie. into planning, design and construction).

Often, our waterways are filled with chemicals and pollutants from stormwater, causing them long term harm. WSUD recognises that waterways are an important asset and need to be protected. By incorporating WSUD measures into our developments, we can reduce the negative effects of stormwater on our waterways.

WSUD measures can be implemented at any scale of development, from the single dwelling level to large scale developments and subdivisions. Common types of WSUD include raingardens, porous paving and rainwater tanks.

A well designed dwelling or addition helps to reduce water usage, finds ways to take advantage of water that is captured on site, and can assist with improving water quality for water which flows back into our important waterways.

Water Sensitive Urban Design recognises that all water streams in the water cycle are valuable resources including rainwater (collected from the roof), runoff (including stormwater, collected from all impervious surfaces), potable water (drinking water), groundwater, grey water (water from bathroom taps, showers and laundries) and black water (from toilets and kitchen sinks). Some examples of WSUD measures are outlined below.

Rainwater Tanks

  • The purpose of a rainwater tank is to collect and store stormwater captured from roofs, downpipes and gutters.
  • Rainwater tanks have become a common site across Victoria in recent years, and they come in a range of shapes, sizes and colours.
  • Rainwater tanks enable the conservation of mainswater.
  • Their installation can help to reduce water bills through water reuse.
  • Rainwater tanks help to treat stormwater and protect local streams from pollutants which are produced from residential uses.
  • Tank water can be used to water gardens, wash clothes and flush toilets, which assists with reducing the demand on drinking water.

Raingardens

  • Raingardens are specially designed garden beds that use plant and soils to help with the capturing, filtering and cleaning of stormwater.
  • They assist with minimising stormwater runoff to stop pollutants entering our waterways.
  • Raingardens have layers of mulch, planting (native plants work well, but any species can be used) and soil, with a drain underneath to reduce flooding risk.
  • Rainwater gardens can come in different forms including planter boxes, in-ground, swale,and vegetable gardens.

Raingardens work in the following manner (Source: Melbourne Water):

  • Water collects and settles on the garden surface.
  • Water soaks through the plants and filter media, trapping rubbish and sediment on the surface.
  • Plants use the nutrients in the stormwater, and toxins stick to the soil.
  • The soil and plant roots work together to naturally filter the water and remove pollutants.

Porous paving

  • Paved surfaces including roads, footpaths, driveways and courtyards cover a significant area within our environments.
  • A lot of these surfaces are ‘impervious’, which means that rainwater can not pass through them into the ground below. Instead, it runs off into the stormwater, carrying pollutants into our waterways and putting additional pressure on the stormwater system.
  • To stop this occurring, we need to reduce the amount of ‘impervious surfaces’ by incorporating porous paving, which comes in a range of styles and finishes (ie asphalt, modular pavers that are concrete, ceramic or plastic).

Environmentally Sustainable Design, Energy Efficiency and Subdivision

Incorporating environmentally sustainable and energy efficient design principles into subdivisions is important to ensure ongoing sustainability in Victoria’s towns and communities.

This information outlines the environmental sustainability and energy efficiency of subdivisions, rather than the actual dwellings/buildings which will be constructed within the subdivision. Incorporating environmentally sustainable design and energy efficiency measures in subdivisions can be undertaken at a range of different subdivision scales. Often such measures can be selling points for potential home owners.

Good Environmentally Sustainable and Energy Efficiency design elements for subdivisions include:

  • Pedestrian and cycling friendly neighbourhoods that allow easy access
  • A well integrated network of open space
  • The use of recycled water and Water Sensitive Urban Design (WSUD) measures
  • Higher density housing located around activity centres, and the incorporation of shops and mini retail centres, playground equipment and parks, and schools
  • Lot layout which allows for optimum solar orientation, including orientation of public open space
  • A diversity of lot sizes to accommodate a range of dwellings
  • The use of drought tolerant plants and indigenous species
  • The use of low energy street lighting
  • Footpaths on both sides of the street to enable active travel
  • Good access to community facilities and public transport options

Case Studies:

  • The Cape, Cape Paterson, Victoria
  • Mullum Creek, Donvale, Victoria
  • YarraBend, Alphington, Victoria
  • Witchcliffe Ecovillage, Margaret River, Western Australia
  • Lochiel Park, Campbelltown, South Australia

Source: Environmentally Sustainable Design for Subdivisions in Regional Victoria (AECOM)

ESD and Energy Efficiency Case Studies

The following are some ESD and Energy Efficiency Case Studies:

The Cape at Cape Paterson

The Cape at Cape Paterson is located in Cape Paterson, about 140km south east of Melbourne, approximately 10 minutes from Wonthaggi. The vision of The Cape is to create a benchmark for sustainable living, with dwellings required to achieve a minimum 7.5 star energy rating. For further information on The Cape, please visit The Cape website.

Sustainable House Day

Sustainable House Day encourages members of the public to visit some of Australia’s most sustainable houses. To explore some of these dwellings, please visit the Sustainable House Day website.

YourHome

For some other examples of best practice sustainable design and construction, please visit the YourHome website.

Useful Links and Resources

No items found.
No items found.
No items found.

2020 Minutes and Agendas

No items found.

There are a range of Design Assessment Tools to measure environmentally sustainable design and energy efficiency. Some of the most common Tools include:

BESS (Built Environment Sustainability Scorecard)

BESS is an online sustainable design assessment tool. It is:

  • A free tool for planning applicants to use
  • Assesses all types of buildings of all different sizes,including mixed use developments
  • Is an easy and straight forward program to use
  • Can be used as a bench marking tool against other developments
  • Assists with reducing the running costs of new buildings
  • Provides a range of liveability and useability benefits for building owners and users
  • The information required to complete a BESS Assessment depends on the nature of the proposal; simpler applications require more basic information, whereas larger, more complex applications require more detailed information.

For more information visit the BESS website.

STORM (Stormwater Treatment Objective – Relative Measure)

STORM is a free tool which assesses storm water management qualities. The purpose of STORM is to assess whether best practice water quality objectives can be achieved as part of a development. STORM is managed by Melbourne Water.

For more information visit the STORM website.

NatHERS (Nationwide House Energy Rating Scheme)

NatHERS is a star rating system (out of 10) which determines the energy efficiency (heating and cooling) of a dwelling, based on the design of the dwelling. It assists with meeting the requirements of the National Construction Code. The purpose of NatHERS is to assist with designing homes which are more comfortable for inhabitants and to reduce the operating costs of the dwelling.

For more information visit the NatHERS website or view a short video on YouTube explaining Energy Efficiency at Home.

2019 Minutes and Agendas

No items found.

There are a range of Design Assessment Tools to measure environmentally sustainable design and energy efficiency. Some of the most common Tools include:

BESS (Built Environment Sustainability Scorecard)

BESS is an online sustainable design assessment tool. It is:

  • A free tool for planning applicants to use
  • Assesses all types of buildings of all different sizes,including mixed use developments
  • Is an easy and straight forward program to use
  • Can be used as a bench marking tool against other developments
  • Assists with reducing the running costs of new buildings
  • Provides a range of liveability and useability benefits for building owners and users
  • The information required to complete a BESS Assessment depends on the nature of the proposal; simpler applications require more basic information, whereas larger, more complex applications require more detailed information.

For more information visit the BESS website.

STORM (Stormwater Treatment Objective – Relative Measure)

STORM is a free tool which assesses storm water management qualities. The purpose of STORM is to assess whether best practice water quality objectives can be achieved as part of a development. STORM is managed by Melbourne Water.

For more information visit the STORM website.

NatHERS (Nationwide House Energy Rating Scheme)

NatHERS is a star rating system (out of 10) which determines the energy efficiency (heating and cooling) of a dwelling, based on the design of the dwelling. It assists with meeting the requirements of the National Construction Code. The purpose of NatHERS is to assist with designing homes which are more comfortable for inhabitants and to reduce the operating costs of the dwelling.

For more information visit the NatHERS website or view a short video on YouTube explaining Energy Efficiency at Home.

2018 Minutes and Agendas

No items found.

There are a range of Design Assessment Tools to measure environmentally sustainable design and energy efficiency. Some of the most common Tools include:

BESS (Built Environment Sustainability Scorecard)

BESS is an online sustainable design assessment tool. It is:

  • A free tool for planning applicants to use
  • Assesses all types of buildings of all different sizes,including mixed use developments
  • Is an easy and straight forward program to use
  • Can be used as a bench marking tool against other developments
  • Assists with reducing the running costs of new buildings
  • Provides a range of liveability and useability benefits for building owners and users
  • The information required to complete a BESS Assessment depends on the nature of the proposal; simpler applications require more basic information, whereas larger, more complex applications require more detailed information.

For more information visit the BESS website.

STORM (Stormwater Treatment Objective – Relative Measure)

STORM is a free tool which assesses storm water management qualities. The purpose of STORM is to assess whether best practice water quality objectives can be achieved as part of a development. STORM is managed by Melbourne Water.

For more information visit the STORM website.

NatHERS (Nationwide House Energy Rating Scheme)

NatHERS is a star rating system (out of 10) which determines the energy efficiency (heating and cooling) of a dwelling, based on the design of the dwelling. It assists with meeting the requirements of the National Construction Code. The purpose of NatHERS is to assist with designing homes which are more comfortable for inhabitants and to reduce the operating costs of the dwelling.

For more information visit the NatHERS website or view a short video on YouTube explaining Energy Efficiency at Home.

2017 Minutes and Agendas

No items found.

There are a range of Design Assessment Tools to measure environmentally sustainable design and energy efficiency. Some of the most common Tools include:

BESS (Built Environment Sustainability Scorecard)

BESS is an online sustainable design assessment tool. It is:

  • A free tool for planning applicants to use
  • Assesses all types of buildings of all different sizes,including mixed use developments
  • Is an easy and straight forward program to use
  • Can be used as a bench marking tool against other developments
  • Assists with reducing the running costs of new buildings
  • Provides a range of liveability and useability benefits for building owners and users
  • The information required to complete a BESS Assessment depends on the nature of the proposal; simpler applications require more basic information, whereas larger, more complex applications require more detailed information.

For more information visit the BESS website.

STORM (Stormwater Treatment Objective – Relative Measure)

STORM is a free tool which assesses storm water management qualities. The purpose of STORM is to assess whether best practice water quality objectives can be achieved as part of a development. STORM is managed by Melbourne Water.

For more information visit the STORM website.

NatHERS (Nationwide House Energy Rating Scheme)

NatHERS is a star rating system (out of 10) which determines the energy efficiency (heating and cooling) of a dwelling, based on the design of the dwelling. It assists with meeting the requirements of the National Construction Code. The purpose of NatHERS is to assist with designing homes which are more comfortable for inhabitants and to reduce the operating costs of the dwelling.

For more information visit the NatHERS website or view a short video on YouTube explaining Energy Efficiency at Home.

2016 Minutes and Agendas

No items found.

There are a range of Design Assessment Tools to measure environmentally sustainable design and energy efficiency. Some of the most common Tools include:

BESS (Built Environment Sustainability Scorecard)

BESS is an online sustainable design assessment tool. It is:

  • A free tool for planning applicants to use
  • Assesses all types of buildings of all different sizes,including mixed use developments
  • Is an easy and straight forward program to use
  • Can be used as a bench marking tool against other developments
  • Assists with reducing the running costs of new buildings
  • Provides a range of liveability and useability benefits for building owners and users
  • The information required to complete a BESS Assessment depends on the nature of the proposal; simpler applications require more basic information, whereas larger, more complex applications require more detailed information.

For more information visit the BESS website.

STORM (Stormwater Treatment Objective – Relative Measure)

STORM is a free tool which assesses storm water management qualities. The purpose of STORM is to assess whether best practice water quality objectives can be achieved as part of a development. STORM is managed by Melbourne Water.

For more information visit the STORM website.

NatHERS (Nationwide House Energy Rating Scheme)

NatHERS is a star rating system (out of 10) which determines the energy efficiency (heating and cooling) of a dwelling, based on the design of the dwelling. It assists with meeting the requirements of the National Construction Code. The purpose of NatHERS is to assist with designing homes which are more comfortable for inhabitants and to reduce the operating costs of the dwelling.

For more information visit the NatHERS website or view a short video on YouTube explaining Energy Efficiency at Home.

2015 Minutes and Agendas

No items found.

There are a range of Design Assessment Tools to measure environmentally sustainable design and energy efficiency. Some of the most common Tools include:

BESS (Built Environment Sustainability Scorecard)

BESS is an online sustainable design assessment tool. It is:

  • A free tool for planning applicants to use
  • Assesses all types of buildings of all different sizes,including mixed use developments
  • Is an easy and straight forward program to use
  • Can be used as a bench marking tool against other developments
  • Assists with reducing the running costs of new buildings
  • Provides a range of liveability and useability benefits for building owners and users
  • The information required to complete a BESS Assessment depends on the nature of the proposal; simpler applications require more basic information, whereas larger, more complex applications require more detailed information.

For more information visit the BESS website.

STORM (Stormwater Treatment Objective – Relative Measure)

STORM is a free tool which assesses storm water management qualities. The purpose of STORM is to assess whether best practice water quality objectives can be achieved as part of a development. STORM is managed by Melbourne Water.

For more information visit the STORM website.

NatHERS (Nationwide House Energy Rating Scheme)

NatHERS is a star rating system (out of 10) which determines the energy efficiency (heating and cooling) of a dwelling, based on the design of the dwelling. It assists with meeting the requirements of the National Construction Code. The purpose of NatHERS is to assist with designing homes which are more comfortable for inhabitants and to reduce the operating costs of the dwelling.

For more information visit the NatHERS website or view a short video on YouTube explaining Energy Efficiency at Home.

2014 Minutes and Agendas

No items found.

There are a range of Design Assessment Tools to measure environmentally sustainable design and energy efficiency. Some of the most common Tools include:

BESS (Built Environment Sustainability Scorecard)

BESS is an online sustainable design assessment tool. It is:

  • A free tool for planning applicants to use
  • Assesses all types of buildings of all different sizes,including mixed use developments
  • Is an easy and straight forward program to use
  • Can be used as a bench marking tool against other developments
  • Assists with reducing the running costs of new buildings
  • Provides a range of liveability and useability benefits for building owners and users
  • The information required to complete a BESS Assessment depends on the nature of the proposal; simpler applications require more basic information, whereas larger, more complex applications require more detailed information.

For more information visit the BESS website.

STORM (Stormwater Treatment Objective – Relative Measure)

STORM is a free tool which assesses storm water management qualities. The purpose of STORM is to assess whether best practice water quality objectives can be achieved as part of a development. STORM is managed by Melbourne Water.

For more information visit the STORM website.

NatHERS (Nationwide House Energy Rating Scheme)

NatHERS is a star rating system (out of 10) which determines the energy efficiency (heating and cooling) of a dwelling, based on the design of the dwelling. It assists with meeting the requirements of the National Construction Code. The purpose of NatHERS is to assist with designing homes which are more comfortable for inhabitants and to reduce the operating costs of the dwelling.

For more information visit the NatHERS website or view a short video on YouTube explaining Energy Efficiency at Home.

Was this page helpful?
Thank you! Your feedback has been successfully sent.
There was an ERROR, please try again.
Page last updated:
Wednesday, December 18, 2019
Contact Us
Wellington Shire Council
After Hours Emergency
Service Centres
Sale Service Centre
18 Desailly Street (PO Box 506)
Sale VIC 3850
Operating Hours
Monday to Friday 8.30am - 5.00pm
Yarram Service Centre
156 Grant Street
Yarram VIC 3971
Operating Hours
Monday, Tuesday, Thursday, Friday 10.00am - 2.00pm (Closed Wednesday)
Official website of Wellington Shire Council © 2020.
Wellington Shire Council acknowledges the Gunaikurnai People as the traditional owners of the land that is now Wellington Shire.